参考文献
[1] NORDMARK E, GILLIGAN R. Basic transition mechanisms for IPv6 hosts and routers [S].RFC 4213. 2005.
[2] BAKER F, LI X, BAO C, et al. Framework for IPv4/IPv6 Translation [S]. RF C6144. 2011.
[3] BAO C, HUITEMA C, BAGNULO M, et al.IPv6 addressing of IPv4/IPv6 translators [S]. RFC 6052. 2010.
[4] BAGNULO M, SULLIVAN A, MATTHEWS P,et al. DNS64: DNS extensions for network address translation from IPv6 clients to IPv4 servers [S]. RFC 6147. 2011.
[5] LI X, BAO C, CHEN M, et al. The CERNET IVI translation design and deployment for the IPv4/IPv6 coexistence and transition [S]. RFC 6219. 2011.
[6] LI X, BAO C, BAKER F. IP/ICMP translation algorithm [S]. RFC 6145. 2011
[7] LI X, BAO C, WING D, et al. Stateless source address mapping for ICMPv6 packets [S]. RFC 6791. 2012.
[8] BAGNULO M, MATTHEWS P, VAN BEIJNUM I. Stateful NAT64: Network address and protocol translation from IPv6 clients to IPv4 servers [S]. RFC 6146. 2011.
[9] LI X, BAO C, DEC W, et al. Mapping of address and port using translation (MAP-T) [R]. draft-ietf-softwire-map-t-00. 2012.
[10] TROAN O, DEC W, LI X, et al. Mapping of address and port with encapsulation (MAP) [R]. draft-ietf-softwire-map-02. 2012.
[11] MRUGALSKI T, TROAN O, BAO C, et al. DHCPv6 options for mapping of address and port [R]. draft-ietf-softwire-map-dhcp-01. 2012.
[12] SUN Q, CHEN M, CHEN G, et al. Mapping of address and port (MAP) -- Deployment considerations [R]. draft-ietf-softwire-map-deployment-00. 2012.
[13] CONTA A, DEERING S. Generic packet tunneling in IPv6 specification [S]. RFC 2473. 1998.
